EOSS System Doors & Windows (Shandong) Co., Ltd

 

Passive doors and windows are a new type of modern architectural design technology that has emerged in recent years. Different from traditional doors and windows, passive doors and windows have more advanced structural design, better heat insulation and sound insulation, and can achieve energy saving and environmental protection. Therefore, more and more architects and designers are beginning to use passive doors and windows to design buildings.

 

 

1. An isobaric balance hole is opened to allow rainwater to be discharged smoothly to the outside, improving the water-tightness of the entire window. A drainage hole is opened to allow rainwater to be discharged smoothly to the outside, improving the water-tightness of the entire window.

 

 

2. Adopt special threshold plug design to simplify processing technology and improve air-tightness.

 

 

3. Special sealing accessories are used at the crimping seams to improve air-tightness.

 

 

4. Use special die-cast T-link locking Corner Connector to increase the strength and sealing performance of the T-link position.

 

 

 

Anodizing, through the action of electric current, forms an oxide film on the surface of aluminum to improve corrosion resistance and aesthetics.

Electrophoresis, through the action of electric field, the charged particles move in a directional manner in the solution and deposit on the surface of the product to form a coating.

Fluorocarbon spraying, through electrostatic spraying technology, fluorocarbon coating is evenly sprayed on the surface of the product to form a protective film.

Powder spraying, powder coating is evenly sprayed on the surface of the product, and then melted and solidified at high temperature to form a coating.

Wood grain transfer, transfer the wood grain pattern to the metal surface to form an imitation wood grain effect.

 

 

https://www.eosswindow.com/